Skip to main content

Home Product introduction Static-related products Static eliminator(Ionizer) Fan type Fan type(AC) Fan type ionizer (LFA-03B2/LFA-05B)

Fan type ionizer (LFA-03B2/LFA-05B)

LFA-03B2.jpg

LFA-05B.jpg

Features

  • The lamp signals when the unit needs cleaning, ensuring that you never miss the appropriate time for maintenance.
  • The front louver can be removed with a single touch, allowing easy maintenance.
  • Discharging electrode needles made of a special alloy with low dust emission enable use of the unit in a clean-room environment.
  • The wide air outlet enables static elimination over a wide area.
  • The original louver slats allow high-speed ionization even from a long distance.

LFA-03B2_02.jpg

Specifications

Model LFA-03B2 LFA-05B
Ion generation method AC corona discharge
Discharging electrode needle Special alloy with low dust emission
Ion balance* Within ±10V (at time of factory shipment)
Fan speed Variable (non-step)
Maximum air volume 2.5(50Hz)/
2.9(60Hz)m3/min
2.5(50Hz)/
2.9(60Hz)m3/min×2FAN
Maximum airflow speed* 3.1(50Hz)/
3.6(60Hz)m/sec
2.0(50Hz)/
2.5(60Hz)m/sec
Alarm and safety equipment Cleaning alarm, high-voltage alarm indicated by red LED lamp, auto power off (in response to front louver removal)
Amount of ozone production* 0.02 ppm or less
Operating environment Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation)
Input condition AC100V, 50 Hz or 60 Hz (switchable)
Power cable Approx. 2.5 m (power cable with grounding electrode)
Power consumption Approx. 35VA Approx. 60VA
Mass Approx. 7kg Approx. 9.5kg

*Measurement distance: 300mm

Ionization performance

LFA-03B2_03.gif

Dimensions [mm] and names of parts  

LFA-03B2

LFA-03B2_04.gif

LFA-05B

LFA-03B2_05.gif

Inquiries

Products in related categories

Static-related products > Static eliminator(Ionizer) > Fan type > Fan type(AC)


Static-related products > Products for the electronics industry > Ionizer > Fan type(AC)


Return to Top Page