●DC Static Eliminator with Built-in High-Voltage Power Source MODEL APKF

- A cleaning lamp is provided to let you know when cleaning is needed. This lamp makes it easy for you to keep track of maintenance schedules (APKF-0000-H only).
- The built-in high-voltage generation circuit in the static eliminating electrodes has eliminated the need for high-voltage wiring, thus enhancing safety.
- Grounding electrodes are provided in the DC static eliminator to stabilize corona discharge (patent pending). This has improved the stability of the electric field shield effect and ion balance, reducing the required frequency of cleaning of the discharging electrodes.
- Static eliminator electrode needles made of a special alloy with low dust emission come as standard equipment and can be used in a clean-room environment. The electrode needles are easy to replace.
- Using this model together with clean air enables high-speed static elimination.
- Being a DC type, this static eliminator generates significantly more ions than other types, enabling high-speed static elimination.

●DC Static Eliminator MODEL KD-309

  Back to Top

- The good ion polarity balance causes little reverse charging due to ion irradiation.
- The good ion polarity balance enables efficient static elimination regardless of the polarity or potential of the charged object.
- The long ion irradiation distance makes this model well suited for static elimination on a charged object in a confined area or at a distance.
- Its good ion generation efficiency makes this model suited for static elimination on a charged object running at high speed. This model generates very little ozone.
- Being a DC type, this static eliminator, unlike PULSE-DC, involves no swing in the surface potential of the charged object.
- The CKDB electrode facilitates needle replacement, cleaning, periodic inspection, etc.
・Appearance of High-Voltage Power Source KD-309B
・Appearance of High-Voltage Power Source KD-309L
・Appearance of High-Voltage Power Source KD-309W
・Appearance of Static Eliminating Electrode (KDB Type: Up to 1100mm)
・Appearance of Static Eliminating Electrode (KDB-P Type: Up to 3200mm)
・Appearance of Static Eliminating Electrode (KDB-RP Type: 3300mm or Longer)
・Appearance of Static Eliminating Electrode (KDB-G Type: Ion Balance Type)
・Appearance of Static Eliminating Electrode (AKDB-R Type: Air Assist Type)
・Appearance of Static Eliminating Electrode (AKDB-F Type: Ion Balance + Air Assist Type)
・Appearance of Static Eliminating Electrode (KDF Type: Round Electrodes)
・Distance of Installed Electrodes and Static Elimination Potentials
 
 

●DC Nozzle-Type Static Eliminator MODEL ND-503T

  Back to Top

- Static eliminator electrode needles made of a special alloy with low dust emission come as standard equipment and can be used in a clean-room environment.
- The newly developed D.I.C. II circuit enhances the stability of ion balance and prevents the deterioration of static elimination performance. Furthermore, the frequency of maintenance can be significantly reduced.
- Being a DC type, this static eliminator generates significantly more ions than other types, enabling high-speed static elimination.
- An alarm output function comes as standard equipment, enabling the quick detection of characteristic wear issues and abnormalities of the static eliminator such as cleaning alarms and high-voltage abnormality alarms. - The ion balance can be fine-tuned to maintain the potential of the static elimination area to zero volts.
* D.I.C. (double ion control) circuit refers to a circuit that controls both the ion balance and the quantity of generated ions to constantly provide static elimination in the most appropriate way.

●DC Fan-Type Static Eliminator MODEL ITI-02

  Back to Top

- The newly designed fan guard enables quick static elimination even at a distance.
- The newly developed D.I.C. circuit maintains a constant ion balance and consistent quantity of generated ions. The frequency of maintenance can thus be significantly reduced. The front fan guard can be removed in a single motion, facilitating access and maintenance for electrodes and nearby parts.
- At power-up, the static eliminator notifies the user when the next maintenance is due. * D.I.C. (double ion control) refers to a circuit that controls both the ion balance and the quantity of generated ions to constantly provide static elimination in the most appropriate way.

●DC Fan-Type Static Eliminator MODEL KD-730

  Back to Top

- A cleaning lamp is provided to let you know when cleaning is needed. This lamp helps you conveniently keep track of the timing of maintenance.
- Power input and output are available from the rear terminal block. If you want to install several of these static eliminators in the same area or machine, they can be connected in series without the use of individual adapters for each unit. The alarm output function facilitates linking the static eliminator with the machine at the time of maintenance or abnormality.
- The angle adjustor has a lock mechanism that keeps the static eliminator at the same angle despite vibrations, etc.
- The direct mounting of an electrode needle on the fan body allowed us to design an ultrathin body (patented).
- Due to our proprietary technology, this static eliminator has one high-voltage transformer that generates both positive and negative high voltages and a built-in ion balance adjustment circuit. This eliminates any concern about reversed charging due to the failure of one of the transformers, which was a potential problem with conventional DC static eliminators (patent pending).
- This model can safely be used for static elimination in electronic devices because the stainless fan guard is grounded to stabilize the ion balance and shield the electric field (patent pending).
- This model meets the CE standard.

●DC Fan-Type Static Eliminator MODEL KD-740B

  Back to Top

- A cleaning lamp is provided to let you know when cleaning is needed. This lamp helps you conveniently keep track of maintenance timing.
- Power input and output are available from the rear terminal block. If you want to install several of these static eliminators in a single area or manufacturing machine, they can be connected in series without the use of individual adapters for each one. The alarm output function facilitates linking the static eliminator with the machine at the time of maintenance or abnormality.
- Due to our proprietary technology, this static eliminator has one high-voltage transformer that generates both positive and negative high voltages and a built-in ion balance adjustment circuit. This eliminates any concern about reversed charging due to the failure of one of the transformers, which was a potential problem with conventional DC static eliminators (patent pending).
- This model can safely be used for static elimination in electronic devices because the stainless fan guard is grounded to stabilize the ion balance and shield the electric field (patent pending).

●DC Fan-Type Static Eliminator MODEL KD-410B

  Back to Top

- An AC fan with a large airflow is best suited for static elimination from a significant distance.
- The large 150-mm square fan enables static elimination over a large area.
・風速特性
・除電性能特性
 
 
 
 
 
 
 

●DC Fan-Type DC Static Eliminator MODEL KD-720B

  Back to Top

- The direct mounting of an electrode needle on the fan body enabled us to design an ultrathin body (patented).
- Due to our proprietary technology, this static eliminator has one high-voltage transformer that generates both positive and negative high voltages and a built-in ion balance adjustment circuit. This eliminates any concern about reversed charging due to the failure of one of the transformers, which was a potential problem with conventional DC static eliminators (patent pending).  
 
 
 

●Overhead Ionizer MODEL IOH-03/02

  Back to Top

- A newly developed D.I.C. circuit is available for circuit control, keeping constant the ion balance as well as the quantity of ions generated, and enabling static elimination to proceed in the most appropriate way while maintaining high performance, thus significantly reducing the frequency of maintenance.
- The rear fan guard can be removed in a single sliding motion, facilitating access to electrodes and nearby parts and their maintenance.
- At power-up, the static eliminator notifies the user when the next maintenance is due.
- Electrode needles made of a special alloy with low dust emission come as standard equipment and can safely be used in a clean room environment.
* D.I.C. (double ion control) refers to a circuit that controls both the ion balance and the quantity of ions generated to constantly provide static elimination in the most appropriate way.

●DC Static Eliminator MODEL KD-110SI/110

  Back to Top

- This compact and lightweight model can be installed anywhere.
- This model, equipped with a ceramic emitter, is best suited for use in a clean-room environment (KD-110SI).
- The ion balance can be fine-tuned (KD-110SI).
- The built-in high-voltage generation circuit has eliminated the need for high-voltage wiring.
- This static eliminator can be used for static elimination of a clean bench and other areas with a down flow.

 
 

●DC Fan-Type Static Eliminator MODEL FLD

  Back to Top

- This is a lightweight, fan-type static eliminator with a high-voltage DC power source (with a filter).