静電気、除去、測定、除塵、コロナ表面処理、除水のトップメーカー春日電機【製品紹介：印刷関連製品】


	The Control technology of static electricity is developed.
>> Our Products - Printing Related Products	\|

●Printing Related Products

Marking System [MARK PET]

This Tape Marking System for Printers supports a wide range of printers, from large types to small offset types.
Available markers are the TMV-17 (narrow type) and TMH-17 (short barrel type) for high piles and the TM-17 for low piles.
Available counters are the MM4500 and the MM6400. Various sets containing different combinations of markers and counters are available to meet a wide variety of needs. Marking System [MARK PET]

Model	MM-6400	MM-4500
Count display method	LED numeric display 25.4 mm (H) x 14.7 mm (W)	LED numeric display 25.4 mm (H) x 14.7 mm (W)
Count speed	600 sheets per minute	600 sheets per minute
Count input signal (1) Voltage input (2) Contact input (3) Detector	24 to 200VAC, 12 to 200 VDC Microswitch, relay contact, etc. Reflective and transmissive detectors, noncontact switch, etc.	24 to 200VAC, 12 to 200 VDC Microswitch, relay contact, etc. Reflective and transmissive detectors, noncontact switch, etc.
Total output (1) Output (2) Contact capacity (3) Signal width	Relay contact output (contacts b and a) 250 V, 3A About 1 to 5.5 seconds
Count setting range (1) Number count (4 digits) (2) Total count (6 digits)	0 to 9999 0 to 999999	0 to 9999
Paper sampling setting range	1 to 9	1 or 2 sheets
Cutter standby setting	0 to 9 (+5 counts)
Adjustment (1) Tape length (2) Tape standby (3) Cutting standby	About 100 to 500 mm About 0.03 to 0.4 seconds About 0.5 to 2.5 seconds	About 100 to 500 mm About 0.03 to 0.4 seconds About 0.5 to 2.5 seconds
Maximum tape insert count	Once per 10 seconds	Once per 10 seconds
Power supply	85 to 264 VAC (full range) 50/60 Hz	85 to 264 VAC (full range) 50/60 Hz
Power consumption	About 60 VA (using one marker)	About 55 VA (using one marker)）
Data retention time during power failure	1000 hours (on a full charge)	1000 hours (on a full charge)
Temperature and humidity conditions	0 to 40degC, 80%RH or less (no condensation)	0 to 40degC, 80%RH or less (no condensation)
Weight	About 4 kg	About 2 kg
Option	Additional markers (two in total)	Additional markers (two in total)

Double Printing Stoppers

Double Printing Stoppers WA-7

This model can be installed on a printer monitor, and if misfeeding of more than one sheet at a time occurs, a photoelectric detector issues an alarm or a machine stop signal.
This is a compact and easy-to-use model supporting automatic timing.
Dimensions: 140 x 86 x 90 (mm), Weight: About 1.5 kg

Double Printing Stoppers WX-02

This model detects any horizontal misregister or double-sheet misfeeding that occurs in a sheet-fed printer, using the noncontact photoelectric method, adjusts the processing on a microcomputer, and sounds the buzzer or issues a machine control signal.
Dimensions: 185 x 96 x 113 (mm), Weight: About 1.6 kg

Double Printing Stoppers KSW-6

This is an ultrasonic digital double printing stopper (patented) that can detect double-sheet misfeeding with almost any color or material.
Dimensions: 280 x 210 x 100 (mm), Weight: About 4.6 kg