静電気、除去、測定、除塵、コロナ表面処理、除水のトップメーカー春日電機【製品紹介：コロナ表面処理装置】


	The Control technology of static electricity is developed.
>> Our Products - Corona Surface Treatment System	\|

What is Corona Treatment?

[Treatment Stations]
For Plastic Film
For Conductive Film
For Label Printing
For Sheet-Fed Film
For Plastic Molded Products
* Opens a new window

[Components]
Discharging Electrode
Treatment Roll

[New Product Information]
Printing and Thin-Film Coating Irregularity Eliminated (Features of New L-type High-Frequency Generator)

Film Surface Functionalization (Gas Atmosphere Discharge Treatment)

High-Speed Cup Treatment and Pinhole Detection by One Unit (Features of New High-Frequency Power Source AGF-010PT)

Air Plasma (Portable Corona Treatment System)

Batch-Type Atmospheric Pressure Plasma Surface Treatment System

●Corona Surface Treatment System

Lineup of corona surface treatment systems

A corona surface treatment system applies a high-frequency high-voltage corona discharge to the surface of synthetic resin, paper, metal, etc. in order to improve them chemically and physically.
A material surface-modified by corona discharge has the following characteristics.

2. Better adhesion
3. Better printability
4. Better coating properties
5. Better vapor deposition properties
6. Less surface oil content
7. Promotion of surface bleeding of resin additives
8. Surface roughness change

High-frequency generator

The generators consist of an oscillator that generates high-frequency, high-voltage power and a high-voltage transformer.

Type	Model name	Maximum power (kW)	Frequency (kHz)	Power consumption (kVA)	Oscillator outside dimensions Ｗ×Ｄ×Ｈ(mm)	Oscillator weight (kg)	High-voltage transformer outside dimensions W x D x H (mm)	High-voltage transformer weight(kg)
AGI	AGI-023	2.0	15～20	3.2	445x340x221	20.0	311x265x490	24.0
	AGI-024	2.0	15～20	3.2	340x200x465	20.5	311x265x490	24.0
	AGI-033	3.0	15～20	4.5	444x340x423	35.0	311x265x525	24.0
	AGI-043M	4.0	15～20	5.7	444x340x423	35.0	436x308x500	39.0
	AGI-063M	6.0	15～20	8.0	444x340x423	35.0	436x308x500	39.0

	AGI-043	4.0	15～20	5.5	760x405x1300	175.0	480x420x705	90.0
	AGI-063	6.0	15～20	9.0	850x480x1380	240.0	390x340x545	90.0
	AGI-083	8.0	15～20	12.0	850x480x1380	240.0	550x480x890	140.0
	AGI-123	12.0	15～20	19.0	850x530x1480	270.0	550x480x890	155.0
	AGI-163	16.0	15～20	23.0	850x530x1480	270.0	666x666x940	260.0
	AGI-203	20.0	15～20	34.0	900x600x1600	350.0	666x1016x950	300.0
	AGI-303	30.0	15～20	44.0	1100x640x1850	470	880x600x1085	350.0

	AGI-020(DS)	2.0	25～40	3.2	445x340x221	20.0	311x305x524*	23.5
	AGI-021	2.0	25～40	3.2	340x200x465	20.5	311x305x524*	23.5
	AGI-030(DS)	3.0	20～35	4.5	444x340x423	35.0	311x305x524*	23.5
	AGI-040(D)	4.0	25～40	5.5	760x405x1300	175.0	480x420x705	90.0
	AGI-040M(DS)	4.0	25～40	4.5	444x340x423	35.0	436x412x560	39.0
	AGI-060M(DS)	6.0	25～40	8.0	444x340x423	35.0	436x412x560	39.0
	AGI-060(D)	6.0	25～40	9.0	850x480x1380	240.0	390x340x545	90.0
	AGI-080(D)	8.0	5～40	12.0	850x480x1380	240.0	550x480x890	140.0
	AGI-120(D)	12.0	5～40	19.0	850x530x1480	270.0	550x480x890	155.0
	AGI-160(D)	16.0	5～40	23.0	850x530x1480	270.0	666x666x940	260.0
	AGI-200(D)	20.0	5～40	34.0	1100x600x1850	450.0	666x1016x950	300.0
	AGI-201(D)	20.0	5～40	34.0	900x600x1600	350.0	666x1016x950	300.0
	AGI-300(D)	30.0	5～40	45.0	1100x640x1850	470.0	880x600x1085	350.0
	AGI-400(D)	40.0	5～40	48.0	1100x640x1850	550.0	(925x550x830)x２台	(300.0)x２台

AGF	AGF-010(PT)	1.0	30～15	1.7	200x310x190	8.1	256x186x345	12.0
	AGF-020(PT)	2.0	30～12	3.2	220x350x190	11.5	311x265x529	24.0
	AGF-030(PT)	3.0	35～15	4.3	220x350x190	12.0	311x265x529	24.0

AGF-B	AGF-B10(S)	1.0	30～15	1.7	250x180x300	11.0	256x186x345	12.0
	AGF-B20	2.0	30～12	3.2	250x180x300	11.0	311x265x529	24.0
	AGF-B30	3.0	35～15	4.3	250x180x300	11.0	311x265x529	24.0

AGF-A	AGF-A30	3.0	60～10	3.5	433x342x220	20.5	311x265x454	23.5
	AGF-A40	4.0	60～10	4.5	433x342x220	20.5	311x265x454	23.5
	AGF-A60	6.0	60～10	6.5	433x342x220	20.5	436x308x500	39.0
	AGF-A80	8.0	60～10	10.0	600x400x1075	80.0	400x352x500	40.0
※＝The size of high voltage transformer is determined with the way of high voltage cable outlet.

●Ｄ（ＰＤＭ）：For soft treatment (Available for all AGI model)
●Ｓ：For 3 dimensions product. the size for high voltage transformer of S type is different from above mentioned size (2,3,4,6kW)
●ＰＴ：For the high speed switching

Caution
* This selection must be made according to the type and form of base material used. To determine the right match of power supply capacity, electrodes, and treatment rolls, perform calculations using the running speed, treatment in use, and treatment effects (such as wettability and bonding strength) based on the test data and past records.

Treatment station

A treatment station is used to apply corona discharge to treatment objects. This product, consisting of electrodes, treatment rolls, and roll rotation detector, is designed to offer a superior level of safety and utility.
Additionally, an electrode closing device and a gap adjuster are available as options.

●Electrodes●

●Treatment rolls●

The rolls over which the treated base material is run are designed for uniform and stable corona discharge. The rolls installed at a given distance from electrodes are either dielectric-lined or metal rolls, either of which should be selected to match the type of electrodes to be used.

The dielectric lining is made of ceramic, silicone rubber, EPT rubber, Hypalon rubber, etc.

Rubber lining roll - Silicon lining roll - EPT rubber lining roll - Hypalon rubber lining roll	Treatment rolls with dielectric lining on the roll surface, such as silicon, EPT, and Hypalon. Generally used in combination with metal electrodes such as stainless and aluminum electrodes.	For insulating film
Ceramic coating roll	Treatment roll with dielectric lining made of ceramic.	For insulating film
Silicon sleeve roll	Roll with a silicon sleeve (dielectric coating) that can be replaced with relative ease. The roll diameter is 100 mm.	For insulating film
Grounding roll (bare roll)	Metal roll to be used when quartz, ceramic, and roll electrodes are used. For conductive film	For insulating film

Corona treatment, high-density static elimination, with a built-in cleaner

●Features●
- Surface modification of base materials with corona discharge
- High-accuracy static elimination on the whole area via high-density static elimination (patented)
- Removing dust from the surface of base material
- All stainless steel
- Ready for use in a clean room